Carbon steel sheet from Turkey
SteelFromTurkey supplies steel sheet from Turkey for international buyers who need hot rolled sheet, cold rolled steel sheet, slit coil or cut-to-length blanks with RFQ review, documentation checks and export coordination.
Product range
HR SheetUse when the RFQ needs black HR or pickled and oiled sheet for fabrication, machinery, construction components or welded parts.
Review HR Sheet Route
CR SheetUse when the application needs smoother surface quality, tighter thickness control, controlled forming or visible sheet steel parts.
Review CR Sheet Route
StainlessUse when the RFQ requires 304, 316L or 430 stainless sheet with finish, MTC and export packing review.
Review stainless sheet ->
CTLUse when the buyer needs coil-derived flat sheets or blanks with defined length, flatness, surface protection and packing.
Request QuoteRFQ variables
| Product forms | Hot rolled sheet, cold rolled sheet, slit coil, narrow strip, cut-to-length sheet and blanks |
|---|---|
| Common standards | EN 10025, EN 10111, EN 10130, ASTM A1011, ASTM A1008 and ASTM A568 matched to the RFQ |
| Common grades | S235, S275, S355, DD11-DD14, DC01-DC06 and equivalent EN or ASTM grade families where available |
| Dimension fields | Thickness, width, length, slit width, coil ID/OD, coil weight, flatness and tolerance requirements |
| Surface and edge | Black hot rolled, pickled and oiled, cold rolled, oiled or dry, mill edge, slit edge or trimmed edge |
| Documents | MTC, EN 10204 3.1, EN 10204 3.2, third-party inspection, certificate of origin and packing list when required |
| Commercial inputs | Quantity, packing, destination port, delivery country, Incoterm and target shipment timing |
Product selection
Steel sheet requirements usually start with the supplied form. The same project can involve hot rolled sheet, cold rolled sheet, slit coil, narrow strip or cut-to-length blanks, but each route changes feasibility, packing and price.
If the requirement is closer to heavier structural flat steel, use the steel sheet and plate route or a dedicated steel plate RFQ instead of mixing plate terms into a sheet inquiry.
If the material will be painted, formed or used in a visible application, pickled and oiled or cold rolled material may be a better starting point than black hot rolled sheet.
| Requirement | Choose this route | RFQ note |
|---|---|---|
| General fabrication, machinery or construction parts | Hot rolled sheet | State black HR or pickled and oiled surface, grade, thickness, width and length |
| Visible panels, forming or tighter thickness control | Cold rolled sheet | State grade, surface, oiling, flatness, tolerance and forming requirement |
| Roll forming, stamping or narrow strip use | Slit coil | State slit width, width tolerance, edge condition, burr limit, coil ID/OD and coil weight |
| Ready-to-use sheets or blanks | Cut-to-length sheet | State length tolerance, flatness, surface protection, bundle weight and packing |
Standards and surface
Grade and surface choices should be stated before quotation. Standards define mechanical or forming expectations, while surface and edge condition affect downstream cutting, forming, painting and assembly.
| Product route | Common references | Buyer note |
|---|---|---|
| Hot rolled structural sheet | EN 10025 S235, S275, S355 families | Confirm impact, thickness, certificate and application requirements |
| Hot rolled forming sheet | EN 10111 DD11, DD12, DD13, DD14 | State forming method and surface condition |
| Cold rolled sheet | EN 10130 DC01-DC06 or ASTM A1008 grade families | State drawing depth, surface, oiling, flatness and thickness tolerance |
| Hot rolled sheet and strip | ASTM A1011 and ASTM A568 where relevant | Match the US specification to grade and tolerance expectations |
| RFQ field | What to specify |
|---|---|
| Thickness | Nominal thickness in mm plus tolerance if required |
| Width and length | Sheet size, slit width, cut length or coil dimensions |
| Surface | Black HR, pickled and oiled, cold rolled, oiled, dry or skin passed if required |
| Edge | Mill edge, slit edge, trimmed edge and burr expectation where relevant |
| Packing | Palletized sheet packs, waterproof wrapping, edge protection, labels and container loading needs |
Export review
Steel sheet shipments can be reviewed with material certificates, inspection documents and export documentation according to the order requirement. The document scope should be defined before the quote is confirmed.
Final quote basis depends on mill or service-center location, cargo readiness, vessel or container plan, packing method and buyer preference.
For usable quotation review, send the full steel sheet specification instead of only asking for a price per ton.
| Requirement | What to send |
|---|---|
| Certificate | MTC, EN 10204 3.1, EN 10204 3.2 or third-party inspection requirement |
| Packing | Bundle or pallet method, moisture protection, edge protection, labels and marking |
| Destination | Destination port, delivery country, unloading limits and preferred shipment window |
| Commercial term | FOB Istanbul, FOB Izmir, FOB Gemlik, FOB Iskenderun, CIF or other requested Incoterm |
| Quote comparison | Keep grade, dimensions, packing, certificate and Incoterm constant when comparing supplier offers |
Request a Quote
Share grade, dimensions, surface, certificate scope, packing and destination in one pass so SteelFromTurkey can review the right Turkish steel sheet supply route before quoting.
Why SteelFromTurkey
SteelFromTurkey reviews whether the RFQ fits HR sheet, CR sheet, slit coil or cut-to-length blanks before matching a Turkish mill or service-center route.
Buyers can define EN 10204 document needs, third-party inspection, packing, certificate of origin and shipment paperwork before supplier confirmation.
The page stays focused on the fields that change steel sheet feasibility and price: grade, dimensions, surface, quantity, documents, packing, destination and Incoterm.
Process
State hot rolled sheet, cold rolled sheet, slit coil, narrow strip, cut-to-length sheet or blanks.
Share standard, grade, thickness, width, length, tolerance, surface and edge condition.
Specify MTC, EN 10204 3.1 or 3.2, inspection, packing, labels and any project-specific requirement.
Add quantity, destination port, delivery country, Incoterm and shipment timing so feasibility and price are reviewed together.
FAQ
Include product form, standard, grade, thickness, width, length or coil details, surface, edge, tolerance, quantity, certificate requirement, packing, destination and Incoterm.
Request hot rolled sheet for general fabrication, machinery, construction or welded parts where a black or pickled surface is acceptable. Request cold rolled sheet when smoother surface, tighter thickness control or forming behavior is more important.
Yes. Steel sheet RFQs can be reviewed for slit coil, narrow strip, cut-to-length sheet and blanks when the buyer provides thickness, width, length, surface, edge, tolerance and packing requirements.
SteelFromTurkey can review MTC, EN 10204 3.1, EN 10204 3.2 and third-party inspection requirements with the confirmed Turkish mill or service-center route before quotation.
Steel sheet RFQs can be reviewed for FOB Istanbul, FOB Izmir, FOB Gemlik, FOB Iskenderun, CIF or DAP destination port terms when routing is suitable. Final port basis depends on source location, cargo readiness and shipment plan.
Steel sheet price depends on grade, thickness, width, length or coil details, surface, edge, quantity, certificate needs, packing, freight, Incoterm and destination.
Final CTA
Share grade, dimensions, surface, certificate scope, packing and destination in one pass so SteelFromTurkey can review the right Turkish steel sheet supply route before quoting.