SheetStainless sheet
Flat rolled stainless
Fabrication, equipment, cladding, kitchen and industrial use. State thickness, width, length, finish, film and quantity.
Request Sheet QuoteStainless flat steel from Turkey
Stainless Steel Sheet Supplier From Turkey
SteelFromTurkey supplies ASTM A240/EN 10088 stainless steel sheet in 304, 304L, 316L and 430 (1.4301/1.4307/1.4404/1.4016), 0.3–6 mm thickness, 2B/BA/No.4/mirror finish. FOB/CFR pricing from certified Turkish mills with EN 10204 3.1 MTC and inspection coordination.
Qualification summary
Stainless steel sheet supply scope at a glance
The inputs a buyer needs to qualify this stainless route before sending the RFQ. Each line is expanded by the detailed tables and sections below.
| Product | Stainless sheet, cut-to-length sheet, coil, slit coil, strip and plate. |
|---|---|
| Standard | ASTM A240/A240M, ASTM A480/A480M, EN 10088 or the project-specific standard named in your RFQ. |
| Grade | 304, 304L, 316, 316L, 430, 201, 202, 321, 310S and duplex grades reviewed per RFQ; EN references include 1.4301, 1.4307, 1.4401, 1.4404 and 1.4016. |
| Dimensions | Thickness, width, length, tolerance, flatness, coil weight, inside diameter, outside diameter and edge condition. |
| Surface / finish | 2B, BA, No.4 brushed, HL hairline, No.8 mirror and No.1 / 1D hot rolled finish; state the protective film requirement for visible surfaces. |
| Documentation | EN 10204 3.1 or 3.2 MTC, inspection report, packing list, certificate of origin and shipment documents when required. |
| Tests / inspection | PMI, dimensional inspection, surface inspection and third-party inspection when the RFQ includes them; state any project-specific hold point. |
| MOQ / lead time | Confirmed per RFQ against grade, finish, dimensions, quantity, documentation and destination. EN 10204 3.1, 3.2 or third-party inspection can affect both cost and timing. |
| Delivery | EXW Turkey, FOB Turkish port, CIF or DAP destination; state the destination country and port, packing, protective film and required delivery window. |
| Supplier role | SteelFromTurkey supplies stainless steel sheet sourced from Turkish mills and service centres, and checks grade, finish, dimensions, MTC, PMI, inspection, packing and export documentation before quotation. |
Every line above is confirmed for your enquiry against the selected Turkish mill or service-centre route. The detailed specification tables and sections below expand each line with the full grade, finish, documentation and packing scope.
Definition
What Is Stainless Steel Sheet?
Stainless steel sheet is a flat rolled stainless product specified under ASTM A240/A240M and EN 10088, supplied in grades such as 304, 304L, 316L and 430 with surface finishes including 2B, BA and No.4.
Sheet is defined by grade, thickness, width, length, finish and tolerance, and is ordered with an EN 10204 mill test certificate for traceability.
SteelFromTurkey supplies stainless steel sheet from Turkey through certified Turkish mills and verified supply partners for export RFQs.
Product forms
Stainless sheet, coil, cut-to-length and grade-specific RFQ routes
Sheet
CTLCut-to-length stainless sheet
Fixed dimensions
Fixed panel or blank dimensions for project orders. State final length, tolerance, edge and packing preference.
Request Cut-to-Length Quote
CoilStainless coil, slit coil and strip
Coil processing
Service centers, stamping, roll forming and narrow-width forming. State coil weight, width, ID/OD, finish and edge condition.
Request Coil or Strip Quote
PlateStainless steel plate
Heavier flat product
Heavier equipment, pressure, marine or machinery use. State standard, grade, thickness, width, length and testing.
Request Plate Quote304304/304L Stainless Steel Sheet
Stainless grade
Use when the RFQ specifies AISI 304 or 304L austenitic stainless sheet for general fabrication, equipment, tanks or food-related applications.
Request 304/304L Quote316L316L Stainless Steel Sheet
Stainless grade
Use when the RFQ requires AISI 316L molybdenum-bearing stainless sheet for chloride, marine, chemical or corrosion-sensitive service.
Request 316L Quote430430 Stainless Steel Sheet
Stainless grade
Use when the RFQ defines AISI 430 ferritic stainless sheet for decorative, appliance, architectural or cost-effective corrosion-resistant applications.
Request 430 QuoteRFQ variables
Stainless steel sheet specification inputs
| Standards | ASTM A240/A240M, ASTM A480/A480M, EN 10088 or project-specific standard |
|---|---|
| Product forms | Stainless sheet, cut-to-length sheet, coil, slit coil, strip and plate |
| Common grades | 304, 304L, 316, 316L, 430, 201, 202, 321, 310S and duplex grades reviewed per RFQ |
| Surface finishes | 2B, BA, No.4 brushed, HL hairline, No.8 mirror and No.1 / 1D hot rolled finish |
| Dimension fields | Thickness, width, length, tolerance, flatness, coil weight, inside diameter, outside diameter and edge condition |
| Documents | EN 10204 3.1 or 3.2 MTC, inspection report, packing list, certificate of origin, PMI and shipment documents when required |
| Commercial inputs | Quantity, destination country and port, Incoterm, packing, protective film, inspection scope and required delivery window |
Supply overview
Stainless Steel Sheet, Plate and Coil Supply
Stainless steel sheet is ordered as a flat rolled product, usually by grade, standard, thickness, width, length and surface finish. Buyers may also describe the same requirement as stainless sheet, stainless sheet metal or stainless steel sheet metal.
In procurement, the important point is not the wording alone. The quotation depends on the exact material grade, finish, dimensions, tolerance, surface protection, packing and certificate requirement.
SteelFromTurkey supplies stainless steel sheet from certified Turkish mills and verified supply partners. The same RFQ can also include related forms such as stainless steel sheet and plate, stainless coil, slit coil, strip or cut-to-length material when the project requires multiple stainless flat products.
| Buyer Question | What To Specify |
|---|---|
| Which form do I need? | Sheet, plate, coil, slit coil, strip or cut-to-length sheet |
| Which grade do I need? | 304, 304L, 316, 316L, 430 or another confirmed grade |
| Which surface do I need? | 2B, BA, No.4 brushed, No.8 mirror, HL hairline or No.1 |
| Which documents do I need? | EN 10204 MTC, inspection report, packing list, certificate of origin |
| Which quotation basis do I need? | FOB Turkish port, CFR, CIF destination port, DAP or another agreed Incoterm |
Forms and sizes
Available Stainless Sheet Forms and Sizes
Stainless sheet can be supplied as standard sheet, cut-to-length sheet, coil-derived sheet, slit coil or plate, depending on thickness, finish and order quantity.
Buyers who search for stainless steel sheet metal roll or stainless steel sheet coil usually need coil supply, processing flexibility or later cutting at a local service center.
| Supply Form | Typical Use | RFQ Notes |
|---|---|---|
| Stainless sheet | Fabrication, equipment, cladding, kitchen and industrial use | State thickness, width, length, finish, film and quantity |
| Cut-to-length sheet | Projects that need fixed panel or blank dimensions | State final length, tolerance, edge and packing preference |
| Stainless coil | Service centers, stamping, roll forming and repeat production | State coil weight, width, ID/OD, finish and edge condition |
| Slit coil or strip | Narrow-width forming, brackets, clamps and components | State width tolerance, burr requirement and coil weight |
| Stainless plate | Heavier equipment, pressure, marine or machinery use | State standard, grade, thickness, width, length and testing |
Sheet, Plate and Coil: Avoiding Specification Confusion
Sheet, plate and coil are often mixed in early RFQs. Sheet is normally requested as flat cut material. Coil is used when the buyer needs continuous rolled material for processing. Plate is selected for heavier thickness or project conditions.
If a buyer asks for 304 stainless steel plate but also gives thin sheet dimensions, the specification should be clarified before quotation.
Grades
Stainless Steel Sheet Grades: 304, 316, 430 and More
Grade selection controls corrosion resistance, weldability, forming behavior, cost and application fit. The most common stainless steel sheet RFQs involve 304/304L stainless steel sheet and 316L stainless steel sheet, but other grades may be required by environment, budget or fabrication method.
304/304L stainless steel sheet is often the starting point for general use. 316L stainless steel sheet is usually reviewed when the environment includes chlorides, coastal exposure, chemical contact or stronger corrosion risk.
430 stainless steel sheet may suit indoor decorative or appliance use where the buyer accepts ferritic stainless behavior.
| Grade | EN / UNS Reference | Buyer-Relevant Use |
|---|---|---|
| 304 | EN 1.4301 / UNS S30400 | General stainless sheet for equipment, kitchens, tanks, cladding and fabrication |
| 304L | EN 1.4307 / UNS S30403 | Lower-carbon 304 option often selected for welded assemblies |
| 316 | EN 1.4401 / UNS S31600 | Stainless sheet for stronger chloride, marine or chemical exposure |
| 316L | EN 1.4404 / UNS S31603 | Lower-carbon 316 option for welded service and corrosion-sensitive use |
| 430 | EN 1.4016 / UNS S43000 | Ferritic stainless, often used for decorative or appliance applications |
| 201 / 202 | Mn-Ni austenitic grades | Cost-sensitive uses, not a direct equivalent to 304 |
| 321 | EN 1.4541 / UNS S32100 | Stabilized stainless for selected elevated-temperature or welded service |
| 310S / duplex grades | Confirm per RFQ | Niche service conditions; availability and processing should be reviewed |
Finishes
Surface Finish, Rolling Route and Protective Film
Surface finish is not a cosmetic detail only. It affects appearance, cleanability, forming, handling, protection during transport and final application.
The RFQ should state finish and protective film requirements together with grade and dimensions.
Cold rolled stainless steel sheet is commonly associated with 2B, BA and brushed finishes. Hot rolled stainless steel sheet or plate is more often associated with No.1 finish.
Protective PVC film can be requested for visible surfaces, but film type, thickness and removal conditions should be confirmed before order.
| Finish | Buyer Meaning | Common RFQ Use |
|---|---|---|
| 2B | Smooth cold rolled finish | General industrial, fabrication, equipment and food-related uses |
| BA | Bright annealed finish | Decorative, appliance and visible applications |
| No.4 brushed | Directional brushed finish | Kitchen, elevator, architectural and visible surface work |
| HL / hairline | Fine directional finish | Decorative panels and architectural applications |
| No.8 / mirror | Highly polished reflective finish | Decorative applications where surface handling matters |
| No.1 / 1D | Hot rolled, annealed and pickled finish | Plate or heavier flat products |
Dimensions
Thickness, Width and Dimension Requirements
Stainless steel sheet thickness and stainless steel sheet dimensions should be stated in measurable terms.
A useful RFQ gives thickness, width, length, tolerance, flatness requirement and quantity. If the material is coil, the buyer should also state coil weight, inside diameter, outside diameter and edge condition.
Gauge-based requests should be converted into millimeter thickness before quotation to avoid mismatch between regional gauge tables. If the buyer has a drawing, MTO or fabrication schedule, it should be attached to the quote request.
| Field | Example Format |
|---|---|
| Thickness | 0.5 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm or project-specific thickness |
| Width | 1000 mm, 1219 mm, 1250 mm, 1500 mm or custom slit width |
| Length | 2000 mm, 2438 mm, 2500 mm, 3000 mm or cut-to-length requirement |
| Finish | 2B, BA, No.4, mirror, HL or No.1 |
| Edge | Mill edge, slit edge, deburred edge or project-specific edge condition |
| Protection | Paper interleaf, PVC film, pallet, wooden case or seaworthy packing |
Applications
Stainless Steel Sheet Applications by Industry
Stainless steel sheet is selected where corrosion resistance, hygiene, surface appearance or cleanability is important. The correct grade and finish depend on the service environment, fabrication method and visible surface requirement.
Stainless steel resists corrosion, but performance depends on grade, finish, environment, cleaning practice and fabrication quality. For chloride exposure, marine locations or chemical service, 316/316L or a stronger confirmed grade should be reviewed instead of assuming 304 is sufficient.
| Industry | Common Requirement |
|---|---|
| Food and kitchen equipment | 304/304L or 316/316L sheet with cleanable finish |
| Architecture and elevators | No.4 brushed, HL, BA or mirror finish with protective film |
| Chemical and process equipment | 316/316L or project-specific stainless grades |
| Tanks and fabrication | Grade, weldability, thickness and MTC review |
| Automotive and appliance | Sheet, strip or coil with repeatable finish and dimensional control |
| Marine and coastal use | 316/316L or stronger corrosion-resistant options reviewed per environment |
| Industrial maintenance | Replacement sheet, plate or fabricated blanks by project specification |
Supply route
How SteelFromTurkey Supplies Stainless Sheet From Turkey
SteelFromTurkey is a Turkey-based steel supplier and exporter. We supply stainless steel sheet through certified Turkish mills and verified supply partners, then support the buyer with specification review, document coordination, inspection options, packing review and shipment planning.
This model is useful for importers that need a single commercial contact for multiple stainless flat product requests. A buyer can send one RFQ for sheet, coil, plate and related flat steel requirements, then receive a quotation structure based on available grade, finish, quantity and shipment route.
For the broader product family, buyers can also review the steel supplier from Turkey pillar page.
Certified Turkish Mills and Verified Supply Partners
Stainless sheet availability should be confirmed by grade, finish, thickness, width and quantity.
SteelFromTurkey reviews RFQs with Turkish mill and supply partner options that match the requested standard and export requirement.
Where the buyer needs a specific origin statement, MTC type, inspection hold point or packaging method, those requirements should be stated before quotation.
MTC Review, Inspection and Export Packing
Stainless sheet orders can be supported with EN 10204 MTC review, certificate checks, third-party inspection coordination, packing list review and export documentation support when requested.
Buyers can review the quality certificates and MTC support page for documentation planning.
Buyers should state whether they need EN 10204 3.1 or 3.2 documentation, dimensional inspection, surface inspection, PMI or another project-specific control.
Pricing inputs
Stainless Steel Sheet Price Factors
Stainless steel sheet price is project-specific. It is affected by grade, nickel market exposure, finish, thickness, width, quantity, processing, protective film, packing, inspection requirement, certificate requirement, Incoterm and destination.
SteelFromTurkey provides project-specific quotations benchmarked across the Turkish mill network.
RFQs can be reviewed for FOB Turkish port, CFR, CIF destination port or DAP terms. Port references may include FOB Iskenderun, FOB Gemlik, FOB Istanbul and FOB Izmir, depending on mill location, cargo readiness, shipment mode and buyer preference.
| Price Factor | Why It Matters |
|---|---|
| Grade | 304, 316, 430 and specialty grades have different alloy cost structures |
| Finish | BA, No.4, mirror and protective film can change processing and handling cost |
| Thickness and size | Yield, processing and packing depend on dimension |
| Quantity | Mill lot, service-center processing and freight cost depend on volume |
| Certificate and inspection | EN 10204 3.1, 3.2 or third-party inspection may affect cost and timing |
| Incoterm and destination | FOB, CFR, CIF and DAP quotes include different logistics responsibilities |
RFQ checklist
Stainless Steel Sheet RFQ Checklist
Use this checklist when you order stainless steel sheet or ask for a stainless sheet quote from Turkey.
For exporter evaluation, served markets, documentation and shipment terms, review our stainless steel exporter Turkey capability.
| RFQ Item | Detail To Include |
|---|---|
| Product form | Sheet, coil, slit coil, strip or plate |
| Standard | ASTM A240/A240M, ASTM A480/A480M, EN 10088 or project-specific standard |
| Grade | 304, 304L, 316, 316L, 430 or another confirmed grade |
| Finish | 2B, BA, No.4, HL, mirror, No.1 or custom finish |
| Dimensions | Thickness, width and length |
| Coil data | Coil weight, ID/OD and edge condition if coil is requested |
| Quantity | Quantity by weight, pieces or sheets |
| Tolerance | Tolerance, flatness and surface requirements |
| Protection and packing | Protective film, interleaf and packing requirement |
| MTC requirement | EN 10204 3.1, 3.2 or other inspection document |
| Inspection | Third-party inspection, PMI or dimensional inspection if required |
| Destination | Destination country and port |
| Incoterm | FOB Turkish port, CFR, CIF destination port, DAP or other |
| Delivery window | Required delivery window |
| Attachments | Drawing, MTO, technical specification or previous purchase reference |
Request a Quote
Send the stainless sheet RFQ with full technical and commercial details.
Share grade, finish, dimensions, certificate scope, packing and destination in one pass so SteelFromTurkey can review the right Turkish stainless flat supply route before quoting.
Why SteelFromTurkey
Built for quote-ready stainless flat steel sourcing
RFQ review before supplier confirmation
Requests are reviewed by specification, quantity, Incoterm and destination so buyers can compare a clear Turkey-based supply option.
Grade, finish and document routing
SteelFromTurkey checks grade, finish, dimensions, EN 10204 MTC, inspection, PMI, packing and export documentation requirements before quotation.
Certified mills and verified partners
The stainless sheet requirement is matched with Turkish mill and supply partner options that fit the requested form, finish, quantity and export route.
Process
How the stainless sheet RFQ moves
Send product form and grade
State sheet, coil, slit coil, strip or plate, then add ASTM A240/A480, EN 10088 or project standard and the required grade.
Define finish and dimensions
Share 2B, BA, No.4, HL, mirror or No.1 finish, thickness, width, length, tolerance, edge and protective film needs.
Set document and inspection scope
Specify EN 10204 3.1 or 3.2, PMI, third-party inspection, certificate of origin, packing list and any project-specific hold point.
Review export terms
Add quantity, destination country and port, FOB Turkish port, CFR, CIF, DAP or preferred Incoterm and required delivery window.
FAQ
Stainless steel sheet buying questions
What is stainless steel sheet used for?
Stainless steel sheet is used in food equipment, kitchen systems, elevators, architectural cladding, tanks, heat exchangers, chemical equipment, automotive trim and industrial fabrication where corrosion resistance, cleanability or surface appearance matters.
What is the difference between 304 and 316 stainless steel sheet?
304 stainless steel sheet is commonly used for general corrosion resistance and fabrication. 316 stainless steel sheet contains molybdenum and is typically selected for stronger chloride, marine or chemical exposure. Final grade selection should be reviewed against the application and standard.
Which finish should I request for stainless steel sheet?
Common stainless sheet finishes include 2B for general industrial use, BA for bright appearance, No.4 brushed for visible surfaces, No.8 mirror for decorative use and No.1 for hot rolled sheet or plate. The RFQ should state finish, protective film and surface requirements.
Is stainless steel sheet the same as stainless sheet metal?
In many buyer RFQs, stainless steel sheet, stainless sheet and stainless sheet metal refer to the same procurement category. The quotation should still define grade, standard, thickness, width, length, finish, quantity, certificate requirement and packing.
Can I request stainless steel sheet coil or cut-to-length sheet?
Yes. Stainless steel sheet RFQs can include coil, slit coil, strip or cut-to-length sheet. Coil requests should include width, coil weight, inside diameter, outside diameter, finish, edge condition and protective film requirement.
How is stainless steel sheet price calculated?
Stainless steel sheet pricing depends on grade, nickel market exposure, finish, thickness, width, quantity, processing, protective film, packing, inspection requirements, Incoterms and destination. RFQs can be reviewed for FOB Turkish port, CFR or CIF destination port terms.
Can SteelFromTurkey quote FOB Turkish port or CIF destination port?
Yes. Stainless steel sheet RFQs can be reviewed for FOB Turkish port, CFR, CIF destination port or DAP terms. Common Turkish port references include FOB Iskenderun, FOB Gemlik, FOB Istanbul and FOB Izmir, subject to mill location, cargo readiness and shipment plan.
Final CTA
Send the stainless sheet RFQ with full technical and commercial details.
Share grade, finish, dimensions, certificate scope, packing and destination in one pass so SteelFromTurkey can review the right Turkish stainless flat supply route before quoting.