Cold rolled sheet from Turkey
SteelFromTurkey supplies cold rolled steel sheet from Turkey for international buyers who need cut-to-length CR sheet, flat blanks and DC-grade forming sheet with clear specification review and export-ready documentation.
Product range
CR SheetUse for ready-to-use flat sheets where thickness, width, length, flatness, surface protection and bundle packing must be confirmed before quotation.
Request Quote
DC GradeShare the drawing, forming depth and application note when the RFQ needs deep drawing or extra deep drawing cold rolled sheet.
Request Quote
SPCCUse for enclosures, furniture, panels and light fabrication where the RFQ references JIS, ASTM or commercial-quality cold rolled sheet.
Request Quote
CTLUse when the downstream process needs specified sheet size, flatness, packing, moisture protection and export marks reviewed before price.
Request QuoteRFQ variables
| Product forms | Cut-to-length CR sheet, flat blanks, drawing-grade cold rolled sheet and cold rolled sheet in coil form where applicable |
|---|---|
| Common standards | EN 10130, EN 10268, ASTM A1008/A1008M and JIS G3141 matched to the RFQ |
| Common grades | DC01, DC03, DC04, DC05, DC06, ASTM A1008 CS/DS/DDS/EDDS and JIS SPCC/SPCD/SPCE where available |
| Thickness field | State cold rolled steel sheet thickness in mm; common RFQs may start near 0.30 mm and extend to 4.00 mm or thicker per route |
| Width and length fields | State width, length, flatness requirement, length tolerance and bundle format before quotation |
| Surface and edge | Oiled, dry, skin passed, matte or bright where applicable; mill edge, trimmed edge or cut edge |
| Commercial inputs | Quantity, packing, Incoterm, destination port, required quotation date and shipment target |
Product form
Cold rolled steel sheet is specified when the buyer needs flat material with smoother surface, tighter thickness control and better dimensional consistency than standard hot rolled sheet.
SteelFromTurkey can review RFQs for standard cut-to-length cold rolled sheet, drawing-grade sheet, commercial quality CR sheet metal and thicker cold rolled flat product where the supply route supports it.
For master coil or slit coil requirements, use the related cold rolled steel coil route.
| Product form | Buyer use | RFQ focus |
|---|---|---|
| Cold rolled steel sheet | General flat sheet for fabrication, panels and forming | Grade, thickness, width, length, surface and flatness |
| DC04 / DC05 / DC06 cold rolled sheet | Deep drawing and extra deep drawing applications | Forming depth, application, standard and mechanical expectation |
| SPCC / CS grade cold rolled sheet | Commercial quality sheet for enclosures and light fabrication | JIS or ASTM reference, surface, tolerance and packing |
| Cold rolled steel plate | Thicker cold-reduced flat product where available | Confirm thickness, term usage and supply feasibility |
Selection point
The most important purchasing distinction is form. This page covers cold rolled sheet as a cut-to-length flat product. Coil buyers need a different RFQ because coil ID, OD, coil weight, slitting, winding and handling requirements affect the supply route.
Cold rolled metal sheet is often selected when appearance, paintability, forming behavior and thickness control matter more than the lower cost of hot rolled material.
If the part is structural, hidden or less surface-sensitive, compare hot rolled steel coil or broader steel sheet options before finalizing the RFQ.
| Requirement | Select this form | Notes for RFQ |
|---|---|---|
| Ready-to-use flat sheets for fabrication | Cut-to-length CR sheet | Specify length, flatness, surface protection and bundle packing |
| Material for an in-house processing line | Cold rolled steel coil | State coil ID, OD limit if relevant, coil weight and unloading limits |
| Narrow strips for roll forming or stamping | Slit coil | Specify slit width, burr limit, edge condition and coil weight |
| Deep drawing or visible formed parts | DC-grade CR sheet | Specify DC03, DC04, DC05 or DC06 and the downstream application |
Specification control
Grade selection should start with the standard and the forming requirement. A useful CR sheet inquiry should be written around measurable fields instead of only asking for a generic cold rolled sheet price.
Cold rolled steel pricing is RFQ-based. The final price depends on steel market timing, grade complexity, thickness, width, length, surface condition, flatness requirement, quantity, packing, inspection scope, Incoterm, freight and destination.
For high-volume or drawing-sensitive requirements, share the drawing, application note, surface expectation and downstream process.
| Standard | Grade examples | Typical use |
|---|---|---|
| EN 10130 | DC01, DC03, DC04, DC05, DC06 | Cold forming, deep drawing and extra deep drawing |
| EN 10268 | High-yield cold rolled grades | Higher strength forming applications |
| ASTM A1008/A1008M | CS, DS, DDS, EDDS, structural and HSLA families | Commercial, drawing, structural and HSLA sheet |
| JIS G3141 | SPCC, SPCD, SPCE | Cold-reduced carbon steel sheet and strip |
| RFQ field | Example input |
|---|---|
| Product form | Cut-to-length CR sheet or flat blank |
| Standard and grade | EN 10130 DC04, ASTM A1008 DS, JIS G3141 SPCD |
| Thickness | Nominal mm value with tolerance if required |
| Width and length | Sheet dimensions in mm |
| Surface condition | Oiled, dry, skin passed, matte or bright |
| Certificate and inspection | MTC, EN 10204 3.1 or 3.2, buyer inspection or third-party inspection |
| Commercial terms | Quantity, packing, destination, Incoterm and shipment target |
Export review
Cold rolled sheet orders can be scoped with MTCs, EN 10204 3.1 or 3.2 documents where required, third-party inspection, packing list, commercial invoice, certificate of origin and bill of lading.
Packing should be discussed before quotation because flat bundles, pallet protection, moisture protection and container loading can affect the final offer.
Buyers comparing local sourcing options can still use this export route when the requirement is international procurement rather than local retail pickup.
Request a Quote
Share grade, dimensions, surface, flatness, certificate scope, packing and destination in one pass so SteelFromTurkey can review the right Turkish cold rolled sheet route before quoting.
Why SteelFromTurkey
SteelFromTurkey checks grade, thickness, width, length, flatness, surface protection, packing and document needs together before quotation.
Orders can be scoped around mill test certificates, EN 10204 3.1 or 3.2 documents, third-party inspection, export packing and shipment paperwork.
The page keeps attention on the fields that change feasibility and price: grade, standard, dimensions, surface, flatness, quantity, documents and destination.
Process
State cut-to-length CR sheet, flat blank, drawing-grade sheet or related coil route.
Share standard, grade, thickness, width, length, surface, flatness and tolerance requirements.
Specify MTC, EN 10204 3.1 or 3.2, inspection, packing, marking and bundle expectations.
Add quantity, destination port, delivery country, Incoterm and shipment timing so feasibility and price are reviewed together.
FAQ
Include product form, standard, grade, thickness, width, length, surface condition, flatness, edge condition, quantity, certificate requirement, packing, destination port and Incoterm.
Cold rolled steel sheet is commonly requested in 0.30–4.00 mm thickness. EN 10130 drawing-quality grades (DC01–DC06) are typically available from 0.35 mm to 3.00 mm. Thicker gauges may be available under other standards or as hot-rolled pickled material.
Yes. Drawing-grade cold rolled sheet RFQs can be reviewed when the buyer shares the exact standard, grade, thickness, surface quality, flatness, certificate needs and downstream forming application.
Cold rolled steel sheet price is calculated from grade, standard, thickness, width, length, surface, flatness, quantity, packing, certificate scope, inspection, Incoterm, freight and destination.
SteelFromTurkey reviews each CR sheet inquiry individually. Minimum quantities depend on grade, dimensions, surface, stock or mill route, packing method, destination and whether the order can be combined with a suitable service-center or export supply route.
Document scope is confirmed before quotation. Depending on the selected route and buyer requirement, a cold rolled steel sheet order may include MTC, EN 10204 3.1 or 3.2 documents, packing list, commercial invoice, certificate of origin, bill of lading and third-party inspection records.
Final CTA
Share grade, dimensions, surface, flatness, certificate scope, packing and destination in one pass so SteelFromTurkey can review the right Turkish cold rolled sheet route before quoting.