Hot rolled sheet from Turkey
SteelFromTurkey supplies hot rolled steel sheet from certified Turkish mills for international B2B buyers. We review each RFQ against grade, thickness, width, surface, certificate and destination requirements before quotation.
Product range
HR SheetUse for brackets, base plates, welded assemblies, machinery parts and structural components where mill scale surface is acceptable.
Request Quote
HRPOUse when painting, forming or cleaner fabrication makes reduced mill scale and temporary oil protection important.
Request Quote
CTLUse when the RFQ needs sheet size, length tolerance, flatness, bundle weight, packing and export labels confirmed before price review.
Request Quote
PlateUse when the buyer calls the item sheet or plate and the route must be checked by nominal thickness, tolerance, testing and documentation.
Review Plate RouteRFQ variables
| Product forms | Hot rolled sheet, cut-to-length sheet, HRPO sheet and related coil or plate route |
|---|---|
| Common standards | EN 10025, EN 10051, ASTM A36/A36M, ASTM A1011/A1011M and JIS G3101 matched to the RFQ |
| Common grades | S235JR, S275JR, S355JR/J2, A36, ASTM A1011 grade families and SS400 where available |
| Typical dimensions | About 1.5-25.0 mm thickness, 1000-2000 mm width and 2000-12000 mm length, confirmed by route |
| Surface and edge | Black/as-rolled, pickled and oiled, oiled or dry where available; mill edge, cut edge, slit edge or trimmed edge |
| Documents | MTC, EN 10204 3.1, EN 10204 3.2 where required, certificate of origin, packing list and inspection records |
| Commercial inputs | Quantity, packing method, destination port, delivery country, Incoterm and requested shipment timing |
Specification control
A usable HR sheet RFQ should be more specific than a price request. The quote depends on grade, standard, thickness, width, length, surface, edge condition, certificate, quantity, packing and destination.
| Grade or family | Common standard | RFQ note |
|---|---|---|
| S235JR | EN 10025 | General structural and fabrication work |
| S275JR | EN 10025 | Structural components with higher strength than S235 |
| S355JR / S355J2 | EN 10025 | Specify JR or J2 clearly and confirm impact needs |
| A36 | ASTM A36/A36M | Confirm whether the order is sheet, plate or cut-to-length |
| ASTM A1011 grades | ASTM A1011/A1011M | Use exact designation from the specification |
| SS400 | JIS G3101 | Confirm JIS documentation and acceptance criteria |
| RFQ field | What to specify |
|---|---|
| Thickness | Nominal thickness in mm and tolerance requirement if any |
| Width and length | Sheet size, cut-to-length requirement or bundle format |
| Surface | Black/as-rolled, pickled and oiled, oiled or dry where available |
| Edge | Mill edge, cut edge, slit edge or trimmed edge |
| Certificate | EN 10204 3.1 or 3.2 requirement and third-party inspection if needed |
| Delivery term | EXW, FOB, CIF, DAP or another agreed Incoterm with destination port |
Surface decision
Black/as-rolled sheet carries mill scale from hot rolling and is widely used for general fabrication, structural parts and applications where surface appearance is not critical.
Pickled and oiled sheet removes scale and adds temporary oil protection. It can improve suitability for forming, painting or cleaner fabrication workflows.
If the part is visible, painted or tolerance-sensitive, compare HRPO or cold rolled material before finalizing the RFQ.
Buying context
Hot rolled steel sheet is used where strength, weldability and cost efficiency matter more than decorative surface finish.
Construction buyers use hot rolled sheet for brackets, gussets, base plates, connection parts, equipment supports and secondary structural elements.
General fabrication uses include tanks, enclosures, welded assemblies, frames, guards, repair panels and industrial components.
Depending on the confirmed route, hot rolled sheet orders can be supported with EN 10204 3.1 MTCs, certificate of origin, packing list, commercial invoice, bill of lading and third-party inspection coordination.
State special marking, heat traceability, bundle weight, moisture protection, edge protection and pre-shipment inspection needs before pricing.
Request a Quote
Share grade, dimensions, surface, certificate scope, packing and destination in one pass so SteelFromTurkey can review the right Turkish hot rolled sheet route before quoting.
Why SteelFromTurkey
SteelFromTurkey checks whether the requirement fits black HR sheet, HRPO sheet, cut-to-length sheet or a heavier plate route before supplier confirmation.
Buyers can define EN 10204 certificate needs, third-party inspection, packing, certificate of origin and shipment paperwork before the route is confirmed.
We keep grade, dimensions, surface, certificate, packing, Incoterm and destination visible so buyer teams can compare quotations on the same basis.
Process
State black HR sheet, HRPO sheet, cut-to-length sheet or related plate route.
Share standard, grade, thickness, width, length, tolerance, surface and edge condition.
Specify MTC, EN 10204 3.1 or 3.2, inspection, packing, marking and bundle expectations.
Add quantity, destination port, delivery country, Incoterm and shipment timing so feasibility and price are reviewed together.
FAQ
Include product form, standard, grade, thickness, width, length, surface, edge condition, tolerance, quantity, certificate requirement, packing, destination port and Incoterm.
Yes. Black/as-rolled sheet and pickled and oiled HR sheet can be reviewed when the buyer provides the application, surface expectation, dimensions, grade and quantity.
SteelFromTurkey can review MTC, EN 10204 3.1, EN 10204 3.2 and third-party inspection requirements with the confirmed Turkish mill or service-center route before quotation.
Hot rolled steel sheet price depends on grade, thickness, width, length, surface condition, quantity, tolerance, certificate type, packing, freight, Incoterm and destination.
Hot rolled steel sheet RFQs can be reviewed for EXW, FOB Turkish port, CIF or DAP terms when routing is suitable. Final port basis depends on source location, cargo readiness and shipment plan.
Use the nominal thickness, standard, tolerance and project wording in the RFQ. If the requirement is heavier flat product with plate-specific testing or documentation, SteelFromTurkey can route it to the steel plate path.
Final CTA
Share grade, dimensions, surface, certificate scope, packing and destination in one pass so SteelFromTurkey can review the right Turkish hot rolled sheet route before quoting.