Cold rolled flat steel from Turkey
SteelFromTurkey supplies cold rolled steel coil from Turkey for international buyers sourcing master CRC coil, slit coil and cold rolled strip. Each RFQ is reviewed by grade, dimensions, surface condition, edge requirement, coil configuration, documentation and export destination.
Qualification summary
The inputs a buyer needs to qualify this coil route before sending the RFQ. Each line is expanded by the detailed tables and sections below.
| Product | Cold rolled master coil, slit coil and cold rolled strip; sheet length, flatness and sheet packing requirements are handled through the cold rolled sheet route. |
|---|---|
| Standard | EN 10130, EN 10268, ASTM A1008/A1008M and JIS G3141, matched to the RFQ. |
| Grade | DC01, DC03, DC04, DC05 and DC06; ASTM A1008 CS/DS/DDS/EDDS and JIS SPCC/SPCD/SPCE where available. |
| Dimensions | State thickness, width and dimensional tolerance, plus required coil weight, coil ID and maximum OD for your uncoiler. For slit coil, add slit width, width tolerance and maximum acceptable burr. |
| Surface / finish | Oiled, dry, skin-passed, matte or bright where applicable; mill edge, trimmed edge or slit edge. |
| Documentation | Mill test certificate, EN 10204 3.1 or 3.2, and any customer-specific certificate note stated with the RFQ. |
| Tests / inspection | Third-party inspection plus flatness and dimensional checks confirmed against the product standard and your downstream process when the RFQ includes them. |
| MOQ / lead time | Confirmed per RFQ against grade, dimensions, coil weight, quantity, documentation and destination. State the quotation deadline and shipment target so the price basis is quoted against a real route. |
| Delivery | EXW Turkey, FOB Turkish port, CIF or DAP destination; state the destination port, Incoterm and shipment target in the RFQ. |
| Supplier role | SteelFromTurkey supplies cold rolled coil sourced from Turkish mills and service centres, and reviews specification, coil protection, export packing and loading requirements before quotation. |
Every line above is confirmed for your enquiry against the selected Turkish mill or service-centre route. The detailed coil specification table and the sections below expand each line with the full grade, dimension, documentation and packing scope.
Product range
CRCUse for service centers, processors and repeat fabrication programs where grade, standard, thickness, width, coil ID and coil weight define feasibility.
Request Master Coil Quote
SlitSpecify slit width, width tolerance, burr expectation, edge condition and coil weight when the material must fit roll forming, stamping or component lines.
Request Slit Coil QuoteStripFor slit cold rolled material supplied to a defined width where edge condition, width tolerance, burr limit and coil configuration must be reviewed before quotation.
Request Cold Rolled Strip Quote
DQShare the end application, drawing or forming requirement when the project needs DC03-DC06, drawing quality or equivalent exportable grades.
Request Drawing Quality CRC QuoteSpecs
| Product forms | Master coil, slit coil and cold rolled strip. Requirements primarily defined by sheet length, flatness and sheet packing are reviewed through the dedicated cold rolled steel sheet route. |
|---|---|
| Standards | EN 10130, EN 10268, ASTM A1008/A1008M and JIS G3141, matched to the RFQ |
| Dimensions | State thickness, width and applicable dimensional tolerance |
| Coil weight | State the required or maximum acceptable coil weight; availability is confirmed per supply route |
| Coil ID and OD | State the required coil ID and maximum OD according to the buyer's uncoiler and handling equipment |
| Surface condition | Oiled, dry, skin-passed, matte or bright where applicable |
| Edge condition | Mill edge, trimmed edge or slit edge |
| Slitting requirements | State slit width, width tolerance and maximum acceptable burr |
| Flatness and tolerance | Confirm according to the product standard, downstream process and customer requirement |
| Packing | Export packing, coil protection and loading requirements must be stated in the RFQ |
| Documentation | MTC, EN 10204 3.1 or 3.2, inspection scope and customer-specific documentation |
| Commercial inputs | Quantity, Incoterm, destination port, quotation deadline and shipment target |
If the requirement is primarily defined by sheet length, flatness, surface protection and sheet packing, use the Cold Rolled Steel Sheet page. Keep coil-based and finished-sheet RFQs on separate product routes.
Decision points
Define the supplied coil form before discussing price so the RFQ can be routed according to coil processing, handling and export requirements.
| Requirement | Choose this form | Notes for RFQ |
|---|---|---|
| You will process the material in your own service center | Master coil | Include coil ID, OD limit if relevant, max coil weight and unloading limits |
| You need narrow widths for roll forming or stamping | Slit coil | Include slit width, width tolerance, edge condition and burr expectation |
| You need ready-to-use flat sheets | Use the Cold Rolled Steel Sheet page | Include length, flatness, surface protection and sheet packing requirements |
| You need a drawing or forming grade | Coil or strip | Include standard, grade and target application, not only dimensions |
This page focuses on carbon cold rolled master coil, slit coil and strip, not stainless steel coil. Keep stainless and carbon cold rolled specifications in separate RFQs.
For coated flat steel, use the galvanized steel route. For upstream feedstock with looser tolerance, compare hot rolled steel coil.
RFQ checklist
Cold rolled steel coil RFQs should name the standard and grade whenever possible. Surface condition, tolerance and edge condition often matter as much as the base grade for forming, exposed or painted parts.
| Standard family | Common grade examples | Typical use |
|---|---|---|
| EN 10130 | DC01, DC03, DC04, DC05, DC06 | Cold rolled low carbon flat products for cold forming |
| EN 10268 | High yield cold rolled grades, if available per RFQ | Higher strength forming applications |
| ASTM A1008/A1008M | CS, DS, DDS, EDDS, structural and HSLA grades | Carbon, drawing, structural and HSLA sheet requirements |
| JIS G3141 | SPCC, SPCD, SPCE | Cold-reduced carbon steel sheet and strip requests |
Use DC01 for general forming requirements. Specify DC03-DC06 when the component requires deeper drawing or more demanding forming performance. Final grade suitability must be confirmed against the component geometry, mechanical requirements and forming process.
Cold rolled steel pricing is RFQ-based. The final quote depends on base steel cost, grade, thickness, width, surface condition, coil weight, quantity, packing, inspection requirement, Incoterm and destination.
For usable quotation review, send the full specification rather than only asking for a price per ton.
| Surface requirement | Buyer consideration |
|---|---|
| Oiled | Provides temporary corrosion protection during storage and shipment |
| Dry | Specify when downstream cleaning, welding or coating processes restrict residual oil |
| Skin-passed | Used where improved flatness, surface consistency or controlled forming behavior is required |
| Matte | Specify when surface texture, painting or visible finish requirements apply |
| Bright | Confirm where a smoother visible surface is required and available for the selected grade |
| Surface roughness | State the required Ra value only when it is controlled by the component or finishing process |
Request a Cold Rolled Steel Coil Quote
Share the grade, dimensions, surface, edge condition, certificate scope and destination in one pass so SteelFromTurkey can review the right Turkish supply route before quoting.
Why SteelFromTurkey
SteelFromTurkey checks grade, form, surface, tolerance and destination together so the quote matches a realistic Turkish mill or service-center route.
Orders can be scoped around mill test certificates, EN 10204 3.1 or 3.2 documents, third-party inspection, export packing and shipment paperwork.
The page keeps attention on the fields that change feasibility and price: form, grade, dimensions, surface, edge condition, quantity, documents and destination.
Process
State master coil, slit coil or cold rolled strip, then add thickness, width, coil ID, maximum OD, coil weight and handling limits.
Share standard, grade, surface condition, edge condition, tolerance and downstream process or drawing requirement.
Specify MTC, EN 10204 3.1 or 3.2, third-party inspection, packing and any customer-specific certificate note.
Add quantity, destination, Incoterm, quotation deadline and shipment target so feasibility and price are reviewed in one pass.
FAQ
Yes. Cold rolled steel coil RFQs can include master coil, slit coil or cold rolled strip requirements. Buyers should specify thickness, width, coil ID, maximum OD, coil weight, edge condition, surface condition, quantity, certificate needs and destination. Use the dedicated cold rolled steel sheet route when the requirement is defined by finished sheet length, flatness and sheet packing.
A useful CRC RFQ should include product form, standard and grade, thickness, width, coil ID, maximum OD, coil weight, surface condition, edge condition, slitting requirement, quantity, certificate requirement, inspection scope, packing, destination and Incoterm.
SteelFromTurkey can review mill test certificate, EN 10204 3.1 or 3.2, and third-party inspection requirements with the confirmed Turkish mill or service-center route before quotation.
Cold rolled steel coil pricing depends on base steel cost, grade, thickness, width, surface condition, coil weight, quantity, packing, inspection requirements, Incoterms and destination.
Documentation scope is confirmed before quotation. Depending on the selected supply route and order requirements, the export file may include an EN 10204 3.1 mill test certificate, certificate of origin, packing list, commercial invoice, bill of lading and agreed inspection records.