Sheet430 stainless steel sheet
Standard sheet packs
Use when the RFQ defines AISI 430 sheet by thickness, width, length, finish, film, quantity and export packing.
Request QuoteFerritic stainless sheet from Turkey
430 Stainless Steel Sheet Supplier From Turkey
SteelFromTurkey supplies 430 stainless steel sheet for international buyers who need AISI 430 / EN 1.4016 ferritic stainless sheet with finish, dimension, MTC, packing and export quotation review in one RFQ path.
Product range
430 stainless sheet routes for export RFQs
Sheet
Finish2B, BA, No.4 and mirror finish
Finish-driven supply
Use when visible appliance, kitchen, decorative or architectural surfaces need finish and protective film confirmation before quotation.
Request Quote
CTLStandard sizes and cut-to-length
Cut-to-length route
Use when the buyer needs 4x8 sheets, metric sheet sizes, cut lengths, slit widths, flatness or repeat blanks.
Request Quote
MTCMTC, inspection and packing
Export readiness
Use when the RFQ needs EN 10204 certificate review, dimensional checks, surface inspection and export pallet packing.
Request QuoteRFQ variables
430 stainless steel sheet specification inputs
| Product forms | Sheet, coil, slit coil, cut-to-length sheet and confirmed plate route |
|---|---|
| Grade designations | AISI 430 / EN 1.4016 / X6Cr17 / UNS S43000 |
| Standards | ASTM A240/A240M, ASTM A480/A480M, EN 10088-2 and EN 10204 certificate scope on request |
| Surface finishes | 2B, BA, No.4 brushed, mirror or project-specific finish, availability confirmed per RFQ |
| Typical sheet thickness | 0.3-3.0 mm for sheet RFQs; coil and heavier plate routes confirmed separately |
| Common dimensions | 1000, 1219, 1250 or 1500 mm widths; 2000, 2438, 2500, 3000 or 6000 mm lengths |
| Packing | PVC film, paper interleaf, wooden pallet, steel strapping and moisture protection when required |
Grade overview
What Is 430 Stainless Steel Sheet?
430 stainless steel sheet is a ferritic stainless steel grade based mainly on chromium, without the nickel addition used in austenitic grades such as 304 and 316. It is magnetic, non-hardenable by heat treatment and formable in the annealed condition.
Procurement teams usually consider 430 sheet for indoor decorative, appliance, kitchen equipment, trim and light industrial applications where a clean stainless appearance and controlled alloy cost matter. For marine, chloride-rich or aggressive chemical exposure, 304, 316L or another confirmed grade should be reviewed before quotation.
| Property | Reference value |
|---|---|
| Carbon | 0.12% max |
| Chromium | 16.0-18.0% |
| Manganese | 1.00% max |
| Silicon | 1.00% max |
| Phosphorus | 0.040% max |
| Sulfur | 0.030% max |
| Nickel | 0.75% max |
| Tensile strength | 450 MPa min |
| Yield strength | 205 MPa min |
| Elongation | 22% min |
| Hardness | 89 HRB max |
| Common name | EN number | EN name | UNS |
|---|---|---|---|
| AISI 430 | 1.4016 | X6Cr17 | S43000 |
Specification inputs
430 Stainless Steel Sheet Specifications
A complete 430 stainless steel sheet RFQ should define grade, standard, thickness, width, length, finish, tolerance, protective film, quantity, certificate requirement, packing and destination. Early inquiries often mention only 430 sheet or 430 stainless sheet 4x8, but the quotation depends on the full technical and commercial scope.
| Specification field | Common RFQ detail |
|---|---|
| Product form | Sheet, coil, slit coil, cut-to-length sheet or confirmed plate |
| Grade | AISI 430 / EN 1.4016 / UNS S43000 |
| Standards | ASTM A240/A480, EN 10088-2, EN 10204 certificate on request |
| Surface finish | 2B, BA, No.4 brushed, mirror or project-specific finish |
| Sheet thickness | Typically 0.3-3.0 mm, confirm per RFQ |
| Width | 1000, 1219, 1250 or 1500 mm, plus custom slit width when available |
| Length | 2000, 2438, 2500, 3000 or 6000 mm, plus cut-to-length options |
| Packing | PVC film, paper interleaf, wooden pallet, strapping and moisture protection |
Available Surface Finishes
Finish affects appearance, handling, cleaning and packing. The same 430 grade can be unsuitable if the wrong finish is quoted, especially for visible appliance or architectural panels.
| Finish | Buyer use |
|---|---|
| 2B | Smooth cold rolled finish for general industrial and fabrication use |
| BA | Bright annealed reflective finish for appliances and decorative panels |
| No.4 brushed | Directional satin finish for kitchen, elevator and architectural surfaces |
| Mirror / No.8 | Highly polished decorative finish, confirm film and packing before order |
Grade comparison
430 vs 304 Stainless Steel - When to Choose Ferritic
430 vs 304 stainless steel is usually a cost, environment and fabrication decision. 430 can be a practical ferritic option for indoor decorative panels, appliance parts, trim and mild-service equipment where chloride exposure is limited.
304 is usually the stronger choice when the buyer needs higher corrosion resistance, better weldability or broader chemical compatibility. For marine, chemical, outdoor coastal or welded corrosion-critical service, 304 or 316L should be reviewed instead of forcing 430 into the specification.
| Decision factor | 430 stainless steel sheet | 304 stainless steel sheet |
|---|---|---|
| Stainless family | Ferritic | Austenitic |
| Nickel content | No intentional nickel addition; 0.75% max by ASTM limit | Typically 8-10.5% nickel |
| Magnetism | Magnetic | Usually non-magnetic in annealed condition |
| Cost position | Often lower than 304, depending on nickel market and finish | Higher alloy cost due to nickel |
| Corrosion resistance | Good in mild indoor environments | Better for outdoor, food, chemical and chloride exposure |
| Welding | More limited; confirm process and application | Generally better weldability, especially with 304L |
| Typical use | Appliances, trim, interiors, decorative panels | General fabrication, kitchens, tanks, food equipment |
Turkey supply route
Why Source 430 Stainless Steel Sheet From Turkey
Turkey gives international buyers access to a developed flat steel supply base, EU-accessible ports and flexible export routes for sheet, coil and cut-to-length requirements. SteelFromTurkey acts as a Turkey-based steel supplier and exporter, reviewing one 430 sheet RFQ across suitable Turkish mill and service-center options.
This is useful when a buyer needs price benchmarking, finish confirmation, MTC review, packing control and shipment planning in the same quotation process. Common export terms include EXW, FOB Turkish port, CIF destination port and DAP, depending on order scope and destination.
Quality Documentation and Inspection
430 stainless steel sheet orders can be supported with EN 10204 3.1 MTC review, dimensional inspection, surface inspection and third-party inspection coordination when requested. Export packing can include wooden pallets, steel strapping, moisture protection, PVC film and packing list review.
Application fit
Applications by Industry
430 stainless steel is selected where appearance, moderate corrosion resistance, magnetism and cost control matter more than the stronger chloride resistance of 304 or 316. The grade is best reviewed application by application because finish and environment can change the right material choice.
Appliances and Kitchen Equipment
430 is widely used in appliance panels, range hoods, dishwasher panels, washing machine drums, cookware lids and food-service equipment covers. BA and No.4 finishes are common where the surface remains visible, while 2B can suit internal or fabricated parts.
Architectural and Decorative Trim
Interior wall cladding, elevator panels, column covers, decorative strips and retail fixtures often use 430 when the environment is mild and the buyer wants a stainless look at a lower material cost.
Industrial Equipment and Enclosures
Industrial buyers may use 430 sheet for equipment covers, enclosures, control panels, signage and light fabrication in indoor or low-corrosion environments. For washdown areas, coastal exposure or chemical contact, the RFQ should be reviewed against 304, 316L or another confirmed grade.
Quote preparation
Pricing and RFQ Process
430 stainless steel sheet price depends on grade standard, finish, thickness, width, sheet size, order quantity, film, packing, certificate requirement, Incoterm and destination. Public price-per-kg references rarely reflect final landed cost because stainless flat product quotations change with raw material costs, finish processing, logistics and order size.
For broader stainless flat product sourcing, buyers can also review stainless steel sheet from Turkey or related cold rolled steel sheet requirements.
| RFQ field | What to include |
|---|---|
| Grade and standard | ASTM A240 Type 430 or EN 10088-2 1.4016 |
| Product form | Sheet, coil, slit coil, cut-to-length sheet or confirmed plate |
| Dimensions | Thickness, width and length, or coil weight and width |
| Surface finish | 2B, BA, No.4, mirror or another specified finish |
| Protection and packing | Protective film, paper interleaf, wooden pallet and visible-surface handling requirements |
| Documents | EN 10204 3.1, 3.2 or project-specific document scope |
| Commercial terms | Quantity, destination port and Incoterm: EXW, FOB, CIF, DAP or another agreed term |
Request a Quote
Submit your RFQ with full technical and commercial details.
Share grade, finish, dimensions, certificate scope, packing and destination in one pass so SteelFromTurkey can review the right Turkish 430 stainless sheet supply route before quoting.
Why SteelFromTurkey
Built for quote-ready 430 stainless sheet sourcing from Turkey
Grade and finish routing before price
The RFQ is reviewed by AISI 430 / EN 1.4016 grade, finish, dimensions, film, tolerance and end use before a Turkish supply route is confirmed.
MTC and inspection scope defined early
Buyers can define EN 10204 MTC, third-party inspection, surface inspection, packing and export document needs before supplier confirmation.
Turkey-based stainless flat sourcing
SteelFromTurkey reviews the requirement against certified Turkish mills and verified supply partners that fit the requested form, finish and quantity.
Process
How the 430 stainless sheet RFQ moves
Define grade and form
State sheet, coil, slit coil, cut-to-length sheet or plate, then add AISI 430 / EN 1.4016 and the requested standard.
Confirm dimensions and finish
Share thickness, width, length, 2B, BA, No.4 or mirror finish, protective film, tolerance and edge condition.
Set documents and inspection
Specify MTC type, dimensional inspection, surface inspection, third-party inspection and export documentation needs.
Review export terms
Add quantity, destination, Incoterm and shipment timing so feasibility and quotation can be reviewed in one pass.
FAQ
430 stainless steel sheet buying questions
Is 430 stainless steel magnetic?
Yes. 430 is a ferritic stainless steel, which means it is magnetic. This is a key difference from austenitic grades like 304 and 316, which are usually non-magnetic in the annealed condition.
Does 430 stainless steel resist corrosion in outdoor environments?
430 resists corrosion in mild indoor environments and performs well for appliance and decorative use. In outdoor coastal, chloride-rich or highly humid environments, it may show surface staining or pitting over time. For harsh outdoor exposure, 304 or 316L is usually the better grade to review.
Is 430 stainless cheaper than 304?
430 usually has a lower alloy cost than 304 because it contains no intentional nickel addition, while 304 contains a significant nickel percentage. The final price still depends on market conditions, finish, dimensions, quantity and export scope.
What finish options are available for 430 sheet?
Common 430 stainless steel sheet finish types include 2B, BA, No.4 brushed and mirror polish. Finish selection should be confirmed with protective film and packing requirements when the surface will remain visible.
How does 430 corrosion resistance compare to 304?
430 has lower corrosion resistance than 304 because it contains 16-18% chromium without the nickel addition used in 304. For mild indoor use, 430 may be enough; for harsher exposure, review 304 or 316L.
What is the standard sheet size for 430 stainless?
The common 4x8 sheet size is 1219 x 2438 mm. Other metric sizes include 1000 x 2000 mm, 1250 x 2500 mm and 1500 x 3000 mm. Custom sizes can be reviewed through cut-to-length and slit-to-width processing when quantity and tolerance are defined.
Final CTA
Submit your RFQ with full technical and commercial details.
Share grade, finish, dimensions, certificate scope, packing and destination in one pass so SteelFromTurkey can review the right Turkish 430 stainless sheet supply route before quoting.