Aluminium sheet from Turkey
SteelFromTurkey supplies aluminium sheet from Turkey for industrial buyers who need an export-ready RFQ review before quotation. RFQs are reviewed through certified Turkish mills and verified supply partners by alloy, temper, thickness, surface, MTC scope, packing and Incoterm.
Product range
SheetUse for ready-to-fabricate sheet packs. Send alloy, temper, thickness, width, length, tolerance and quantity for quotation.
Request Quote
Coil / CTLUse when sheet is cut to length from coil. Send coil route, cut length, surface, flatness and packing.
Request Quote
FinishUse for visible-surface sheet. Send protective film, interleaving, surface side and finish requirement.
Request Quote
CutUse for cut blanks. Send cutting tolerance, edge condition, drawing and packing method.
Request QuoteRFQ variables
| Product forms | Flat aluminium sheet, coil/cut-to-length sheet, protected/finished sheet and cut pieces or fabrication blanks |
|---|---|
| Common standards | ASTM B209/B209M for aluminium and aluminium-alloy sheet; EN and AA alloy references where part of the buyer drawing, project standard or purchase specification |
| Common alloys | 1050, 1100, 3003, 5005, 5052, 5754, 5083, 6061, 6082 and 7075, subject to RFQ confirmation |
| Common tempers | O, H111, H112, H14, H22, H24, H32, H34, H116, H321, T6 and T651 where applicable |
| Dimension fields | State thickness, width and length in mm or inches with tolerance, flatness and edge condition; add the exact value when a drawing uses gauge |
| Surface and film | Mill finish, brushed, polished or coated where confirmed; PVC protective film, paper interleaving, exposed side and surface defect limits |
| Commercial inputs | Quantity, packing, destination port, Incoterm (FOB Turkish port, CIF or DAP), MTC need and inspection need |
Supply overview
Aluminium sheet is used in fabrication, cladding, enclosures, appliance components, transport parts, signage, HVAC, insulation, machinery covers and general industrial manufacturing. Buyers usually arrive with a material line such as 5052 H32 sheet, 5754 sheet, 6061 T6 sheet or a commercial 1050/3003 requirement, but a workable quote needs more than the alloy name.
SteelFromTurkey reviews sheet aluminium requirements by matching the requested alloy, temper, thickness, surface and document scope to suitable Turkish supply routes. Exact availability depends on mill program, service-center capability, order quantity and timing, so the safest purchasing path is to send the complete specification before asking for price.
Where the buyer specification requires a standard reference, ASTM B209/B209M can be reviewed for aluminium and aluminium-alloy sheet and plate. EN and AA alloy references can also be used when they are part of the buyer's drawing, project standard or purchase specification.
Turkey is practical for buyers who need commercial sheet supply with export documentation, container planning and regional logistics to Europe, the Middle East, North Africa and Central Asia. The benefit is the ability to review the material line, document scope and shipment plan together before the buyer compares offers.
Forms and sizes
Aluminium sheet metal can be supplied as flat sheet packs, cut-to-length material from coil, or project-specific sheet sizes where the selected route supports the requested dimensions. For export RFQs, dimensions should be stated in millimeters or inches with tolerances, because search terms such as aluminium sheet metal thickness or 4x8 sheet are not enough to confirm a technically equivalent offer.
| Form | Typical buyer use | RFQ detail to send |
|---|---|---|
| Flat sheet | Fabrication, panels, enclosures, cladding and covers | Alloy, temper, thickness, width, length, tolerance and quantity |
| Coil/cut-to-length | Repeated sheet supply, service-center processing or production lines | Coil route, cut length, surface, flatness and packing |
| Protected sheet | Visible parts, facade panels, coated or polished surfaces | Protective film, interleaving, surface side and finish requirement |
| Cut pieces | Fabrication blanks and simple processing | Cutting tolerance, edge condition, drawing and packing |
Some buyers need packed sheets ready for fabrication; others need coil material that is cut to length before export. SteelFromTurkey can review coil, sheet pack, cut-to-length, protective film, paper interleaving, pallet packing and crate packing requirements according to the RFQ.
Coil-based supply may require additional fields such as coil width, coil ID, maximum coil weight and edge condition.
Search terms such as metal sheet aluminium can mix material language. Aluminium and steel are separate materials with different weight, corrosion behavior, strength, forming response, joining methods and price drivers. Buyers still comparing both materials can review steel sheet and plate for cross-material context, while this page remains focused on aluminium sheet RFQs.
Material selection
The correct aluminium sheet alloy depends on corrosion exposure, strength, forming, welding, machining, surface finish and document requirements. The table below is selection guidance, not a stock list. Exact mechanical values and chemical limits should be checked against the applicable standard and MTC for the confirmed route.
| Alloy family | Common sheet RFQ examples | Typical reason buyers request it |
|---|---|---|
| 1050 / 1100 | O, H14 and related commercial tempers | General sheet, signage, insulation, light forming and high workability |
| 3003 | H14, H24 and related tempers | General fabrication, roofing, HVAC, covers and moderate-strength sheet |
| 5005 | H14/H24 where available | Architectural and decorative sheet where surface appearance matters |
| 5052 | O, H32, H34 | Corrosion-resistant sheet, enclosures, marine-adjacent and formed parts |
| 5754 | H111, H22/H24 where applicable | Transport, flooring, forming and corrosion-resistant sheet |
| 5083 | H111, H112, H116, H321 where applicable | Marine-adjacent or higher corrosion-resistance requirements |
| 6061 / 6082 | T6 or T651 where available | Machining, structural parts, fixtures and higher-strength applications |
| 7075 | T6/T651 specialist route | High-strength specialist sheet or plate RFQs with traceability review |
A 5052 aluminium sheet supplier request should include the intended forming or corrosion exposure, because 5052 is often selected for general corrosion resistance and fabrication. A 5754 aluminium sheet inquiry should state whether the material is for transport, flooring or formed parts. A 6061 aluminium sheet RFQ should specify temper, flatness, cutting requirement and whether the buyer expects sheet or plate behavior.
For visible surfaces, alloy selection should also consider anodizing, painting, brushing or protective film needs. If the buyer has a downstream coating, welding, forming, bonding or machining process, that process should be included in the RFQ instead of being handled after price comparison.
Dimensions
Aluminium sheet price and feasibility change quickly with thickness, width, length and tolerance. Send the nominal aluminium sheet thickness, unit system, tolerance, flatness requirement, edge condition, surface side, protective film requirement and order quantity. If a drawing uses gauge, add the exact millimeter or inch value so the quote is not based on a local gauge assumption.
Sheet and plate thresholds vary by market, supplier and standard. For that reason, the RFQ should not rely only on the label sheet or plate. State the dimensions and application clearly, then the route can be reviewed against the correct product form.
This also helps avoid mistakes around aluminium sheet metal thickness where buyers may use the same wording for thin sheet, thicker flat product or cut plate.
Surface and packing
Surface finish should be confirmed before price comparison. Mill finish is common for industrial sheet, while brushed, polished, coated or other visible-surface requirements must be checked against the selected route. If the part is visible after fabrication, state the exposed side, finish target, surface defect limits and whether PVC film is required.
Export packing can include paper interleaving, PVC film, edge protection, palletized packs, wooden crates, moisture protection, clear bundle marking and packing lists. Not every finish or packing method is available for every alloy, thickness or quantity, so the RFQ should define finish and packing needs before the quotation is finalized.
Processing
Buyers often ask about cutting sheet aluminium, slitting, cut-to-length supply or simple forming support. These options are reviewed by alloy, temper, thickness, width, surface and tolerance. A soft commercial sheet can behave very differently from a harder H temper or a heat-treated 6xxx sheet, so the downstream process matters.
For aluminium sheet forming, send the bend radius, part drawing, grain direction if relevant, surface expectation and whether cracking or visible marking is a concern. For cut pieces, include final dimensions, tolerance, edge condition, packing method and whether protective film must remain on the material through fabrication.
Documents
International aluminium buyers need document clarity before order confirmation. SteelFromTurkey can review aluminium sheet with MTC requirements, EN 10204 3.1 or 3.2 document needs where applicable, batch or heat traceability, dimensional checks, third-party inspection, certificate of origin, commercial invoice, packing list and loading document requirements.
Certificate scope must be confirmed by the supplying mill, alloy, temper, order size and inspection requirement. EN 10204 3.1 is commonly requested for B2B orders when batch-specific results are needed. EN 10204 3.2 adds third-party countersignature and should be stated early because it can affect cost and timing. For broader document support, review quality documentation support.
Inspection can cover dimensional checks, surface review, packing verification, marking, document review and loading evidence where required. If the buyer needs third-party inspection, the nominated inspection company, hold points and acceptance criteria should be stated before order confirmation. This prevents a late inspection request from changing cost, timing or shipment readiness.
Commercial review
Aluminium sheet price is project-specific. Public price snippets are rarely reliable for B2B export purchasing because they may exclude alloy premium, thickness, cutting, MTCs, export packing, freight, currency and Incoterm. A comparable quotation should be based on the same technical and commercial scope.
Key price drivers include LME/base metal movement, regional premiums, alloy, temper, thickness, width, length, order quantity, surface finish, protective film, cutting or processing, inspection scope, packing method, freight route, destination port, currency and Incoterm. SteelFromTurkey provides quotations after reviewing the complete specification, so the buyer can compare equivalent offers instead of incomplete unit prices.
Export terms
Export RFQs can be reviewed for FOB Turkish port aluminium sheet, CIF destination port aluminium sheet or DAP terms depending on destination, cargo readiness, selected route and shipment plan. Buyers should send the destination country, discharge port, preferred Incoterm, shipment deadline and any unloading constraints.
Packing should be matched to the journey. Sheet bundles may require pallet protection, corner protection, moisture barrier, seaworthy crate packing, container loading photos and clear marks. If the buyer has a project packing specification, include it with the RFQ so the packing cost and responsibility are included in the quotation.
For containerized orders, the sheet dimensions, bundle weight, forklift access, moisture protection and unloading method can affect the packing plan. For less-than-container or mixed cargo shipments, the packing may need extra protection against handling damage. Port routing and document timing should be reviewed together with the final commercial term.
RFQ prep
Use this checklist before sending an aluminium sheet RFQ. Complete specifications help the quotation match the real application.
| RFQ field | What to send |
|---|---|
| Alloy and temper | 1050 H14, 3003 H24, 5052 H32, 5754 H111, 6061 T6 or buyer standard |
| Standard | ASTM B209/B209M, EN/AA reference or project specification |
| Dimensions | Thickness, width, length, tolerance, flatness and edge condition |
| Surface | Mill finish, brushed/polished if confirmed, PVC film or interleaving |
| Quantity | Tonnes, sheets, line items, delivery schedule and repeat program if any |
| Documents | MTC, EN 10204 3.1 or 3.2, certificate of origin, inspection records |
| Logistics | Packing, destination port, Incoterm and requested shipment timing |
Request a Quote
Contact SteelFromTurkey for project-specific aluminium sheet pricing based on alloy, temper, thickness, dimensions, surface finish, quantity, certificate needs, Incoterm and destination.
Why SteelFromTurkey
SteelFromTurkey checks alloy, temper, thickness, dimensions, surface, protective film, packing and document needs together before quotation.
Orders can be scoped around mill test certificates, EN 10204 3.1 or 3.2 documents, third-party inspection, export packing and shipment paperwork.
The page keeps attention on the fields that change feasibility and price: alloy, temper, dimensions, surface, finish, quantity, documents and destination.
Process
State flat sheet, coil/cut-to-length, protected sheet or cut pieces.
Share alloy, temper, standard, thickness, width, length, tolerance, flatness and surface finish.
Specify MTC, EN 10204 3.1 or 3.2, inspection, protective film, packing and bundle expectations.
Add quantity, destination port, country, Incoterm and shipment timing so feasibility and price are reviewed together.
FAQ
Send the alloy, temper, standard, thickness, width, length, tolerance, quantity, surface finish, protective film requirement, packing requirement, destination port, Incoterm, MTC need and inspection requirement. If the order comes from a drawing or project specification, attach the file so the supply route can be reviewed against the real application.
Common aluminium sheet RFQs may include 1050, 1100, 3003, 5005, 5052, 5754, 5083, 6061, 6082 or 7075. Availability depends on mill program, temper, thickness, width, order quantity and delivery timing. Specialist alloys and tight document requirements should be stated early.
Mill test certificates and inspection documents can be reviewed according to the supplying mill, alloy, temper, order scope and buyer requirements. EN 10204 3.1 or 3.2 requirements should be stated in the RFQ. Certificate type should not be assumed until the route and order scope are confirmed.
Aluminium sheet pricing depends on base metal movement, regional premiums, alloy, temper, thickness, dimensions, quantity, surface finish, cutting or processing, packing, freight route, currency and Incoterm. SteelFromTurkey provides project-specific quotations after specification review.
RFQs can be reviewed for FOB Turkish port, CIF destination port or DAP terms depending on selected supply route, cargo readiness, shipment plan and destination requirements. Send the destination port and preferred Incoterm with the technical specification.
No. Sheet is usually used for thinner flat products and forming applications, while plate is used for thicker, more rigid or machined components. Exact thresholds vary by market and supplier, so the RFQ should state thickness, tolerance, flatness and end use clearly.
Final CTA
Contact SteelFromTurkey for project-specific aluminium sheet pricing based on alloy, temper, thickness, dimensions, surface finish, quantity, certificate needs, Incoterm and destination.